View CRS09_4115661.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CRS09
TOSHIBA Schottky Barrier Rectifier Schottky Barrier Type
CRS09
Switching Mode Power Supply Applications Portable Equipment Battery Applications
* * * * Forward voltage: VFM = 0.46 V (max) Average forward current: IF (AV) = 1.5 A Repetitive peak reverse voltage: VRRM = 30 V Suitable for compact assembly due to small surface-mount package "S-FLATTM" (Toshiba package name) Unit: mm
Absolute Maximum Ratings (Ta = 25C)
Characteristics Repetitive peak reverse voltage Average forward current Peak one cycle surge forward current (non-repetitive) Junction temperature Storage temperature Symbol VRRM IF (AV) IFSM Tj Tstg Rating 30 1.5 (Note 1) 30 (50 Hz) -40~150 -40~150 Unit V A A C C
JEDEC JEITA TOSHIBA
3-2A1A
Note 1: Ta = 84C Device mounted on a ceramic board (board size: 50 mm x 50 mm, land size: 2 mm x 2 mm)
Weight: 0.013 g (typ.)
Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25C)
Characteristics Symbol VFM (1) Peak forward voltage VFM (2) VFM (3) Repetitive peak reverse current Junction capacitance IRRM (1) IRRM (2) Cj Test Condition IFM = 0.1 A IFM = 1.0 A IFM = 1.5 A VRRM = 5 V VRRM = 30 V VR = 10 V, f = 1.0 MHz Device mounted on a ceramic board (soldering land: 2 mm x 2 mm) Thermal resistance (junction to ambient) Rth (j-a) Device mounted on a glass-epoxy board (soldering land: 6 mm x 6 mm) Min Typ. 0.35 0.415 0.43 0.8 10 90 Max 0.46 50 70 C/W 140 20 C/W A pF V Unit
Thermal resistance (junction to lead)
Rth (j-)
1
2006-11-13
CRS09
Marking
Abbreviation Code S9 Part No. CRS09
Standard Soldering Pad
Unit: mm 1.2 1.2 2.8
Handling Precaution
Schottky barrier diodes have reverse current characteristics compared to other diodes. There is a possibility SBD may cause thermal runaway when it is used under high temperature or high voltage. Please take forward and reverse loss into consideration during design. The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device. VRRM: Use this rating with reference to the above. VRRM has a temperature coefficient of 0.1%/C. Take this temperature coefficient into account designing a device at low temperature. We recommend that the worst case current be no greater than 80% of the absolute maximum rating of IF(AV) and Tj be below 120C. When using this device, take the margin into consideration by using an allowable Tamax-IF(AV) curve. This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which seldom occurs during the lifespan of the device. Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a Tj of below 120C.
IF(AV):
IFSM:
Tj:
Thermal resistance between junction and ambient fluctuates depending on the device's mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. Please refer to the Rectifiers databook for further information.
2
2006-11-13
CRS09
iF - vF (A)
10 0.8 0.7
PF (AV) - IF (AV)
DC
(pF)
3 Tj = 150C 1 125C 75C 0.3 25C
iF
Instantaneous forward current
0.6 120 0.5 0.4 0.3 0.2 0.1 0 0 = 60
180
Junction capacitance
Cj
0.1
Rectangular waveform
0.03
0 360 Conduction angle 0.4 0.8 1.2 1.6 2.0 2.4
0.01 0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
Instantaneous forward voltage vF
(V)
Average forward current
IF (AV) (A)
Ta MAX - IF (AV) Ceramic substrate (substrate size 50 mm x 50 mm)
160 140 160
T max - IF (AV)
Maximum allowable lead temperature T MAX (C)
140 120 100 80 60 40 20 0 360 IF (AV) Conduction angle VR = 15 V 0.4 0.8 1.2 1.6 2.0 2.4 = 60 Rectangular waveform 120 180 DC
Maximum allowable temperature Ta MAX (C)
120 100 80 60 40 0 360 20 IF (AV) Conduction angle VR = 15 V 0 0 0.4 0.8 = 60 Rectangular waveform 120 180 DC
1.2
1.6
2.0
2.4
0 0
Average forward current
IF (AV) (A)
Average forward current
IF (AV) (A)
rth (j-a) - t
30000 10000 Device mounted on a ceramic board: Soldering land: 2 mm x 2 mm Device mounted on a glass-epoxy board: Soldering land: 6 mm x 6 mm 1000
Transient thermal impedance rth (j-a) (C/W)
100 10
1 1
10
100
1000
10000
100000
Time t (ms)
3
2006-11-13
CRS09
Surge forward current (non-repetitive)
40
Cj - VR
1000
(typ.)
f = 1 MHz Ta = 25C
IFSM (A)
Ta = 25C
(pF) Junction capacitance Cj
f = 50 Hz Half sine waveform 30
500 300
Peak surge forward current
20
100
10
50 30
0 1
3
5
10
30
50
100 10 1 3 5 10 30 50 100
Number of cycles
Reverse voltage
VR
(V)
IR - Tj
100 Pulse test 10
(typ.)
0.8
PR (AV) - VR Average reverse power dissipation
0.7 0 0.6 Rectangular waveform 360
(typ.)
(mA)
VR = 30 V 1
(W)
Reverse current IR
0.5 0.4 0.3 0.2 0.1 0 0
VR Conduction angle Tj = 150C 300 240 180 120 60
DC
0.1
20 V 10 V
0.01 3V 0.001
5V
0.0001 0
20
40
60
80
100
120
140
160
PR (AV)
4
8
12
16
20
24
28
Junction temperature
Tj
(C)
Reverse voltage
VR
(V)
4
2006-11-13
CRS09
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
5
2006-11-13

▲Up To Search▲

Price & Availability of CRS09

	To Download CRS09 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .